Flash & Fix Blank Polytron R2403 VIOLET

Device Brand   : Spreadtrum
Device Model   : P1923
Device CPU     : P1923
Device IntName : P1923_PT
Device Version : 4.4.2
Device Compile : 9/18/2015 10:50:52 AM
Device Project : POLYTRON_R2403_1300_V1.1.3_20150918
Device ExtInfo : POLYTRON_R2403

Bahan :

  1.  Download Firmware PAC POLYTRON_R2403_1300_V1.1.3 atau  Download Disini
  2.  Download Firmware PAC POLYTRON_R2403_1300_V1.0.8 atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Note :
1. Boot volume +/-

 Cara Flash Polytron R2403 via Research Download

Log Read Firmware Polytron R2403
Operation : Read FullFlash [ v1.19 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : P1923_PT
Model Brand : Spreadtrum
Model Device: P1923
AndrVersion : 4.4.2
BaseBand CPU: P1923
Project Ver : POLYTRON_R2403_1300_V1.1.3_20150918
Model Ext   : POLYTRON_R2403

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 838 MiB
Saved to : G:\andro3\POLYTRON\r2403\P1923_P1923_4.4.2_POLYTRON_R2403_1300_V1.1.3_20150918_POLYTRON_R2403\
Done!

Flash Polytron R2407 WHITE GOLD ZT / DARK GOLD ZT

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2407_V5.2.10_20161223
Model Ext   : POLYTRON R2407

Bahan :

  1.  Download Firmware PAC Polytron R2407 WHITE GOLD ZT / DARK GOLD ZT atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Firmware Polytron R2407 versi lainnya :

 Error pada research download baca disini

Note :
1. Boot volume +/-
2. BYPASS FRP Polytron R2407 via research Download, Pastikan Polytron R2407 normal, emmc, Flash terlebih dahulu, bila hp hidup normal dan terkunci FRP (HP EMMC OK), bisa lanjut ke-step berikutnya, masuk ke TAB SETTING (icon GEAR), pilih Tab FLASH OPERATION, Centang ERASE ALL FLASH, Flash=> FRP hilang

Cara Flash Polytron R2407 via Research Download

Log Read Firmware Polytron R2407 white gold zt
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
 ====  Wait for phone…
Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2407_V5.2.10_20161223
Model Ext   : POLYTRON R2407

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
Skip [NID] : WFIXNV1
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
Skip [NID] : WCNFIXNV1
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.img
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2235 MiB
Saved to : E:\andro 1\polytron\r2407\r2407 white gold zt\New folder\SP7731GEA_HDR_device_5.1_POLYTRON_R2407_V5.2.10_20161223_POLYTRON_R2407\
Done!  

Cara Flash & Bypass FRP Polytron R2508 Verifikasi akun Google

Verifikasi akun Google pada Polytron R2508 ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
Brand     : POLYTRON
ProdName  : POLYTRON R2508
ProdModel : POLYTRON R2508
Device    : Android
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_b6580.weg.a.m

Bahan :

  1.  Download  Firmware Polyron R2508 V1.7 + FRP atau Download Disini
  2.  Download  Firmware Polyron R2508 V1.1 + FRP atau Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove verifikasi akun google Polytron R2508 tinggal pake CENTANG FRP only, hanya centang pada tab FRP saja

Cara Flash Polytron R2508 via Flash Tool

Log Read Firmware Polytron R2508
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 5 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513832334D4200F64CF4CC7393
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D4200F64CF4CC7393
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBDEF821B4C26CDD924D044ECA7
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now …
xGPT : Normalize settings Ok!
Brand     : POLYTRON
ProdName  : POLYTRON R2508
ProdModel : POLYTRON R2508
Device    : Android
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_b6580.weg.a.m
[Read Ok] : preloader_b6580_weg_a_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b6580_weg_a_m / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2198 MiB
Scatter saved to : E:\polytron\r2508\New folder\MT6580__POLYTRON__POLYTRON_R2508__Android__6.0__alps-mp-m0.mp1-V2.34_b6580.weg.a.m\

All done!

Flash Polytron R2502 White & Red

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

Bahan :
1. Download Firmware PAC Polytron R2502

 

 

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash Polytron R2502 via Research Download

Log Read Firmware Polytron R2502
Start  at : [3/23/2017 / 8:57:54 PM]
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1071 MiB
Saved to : E:\InfinityBox\CM2SPD\Flash\SP7731GEA_scx35_sp7731gea_4.4.2_Polytron.B1B8.007.20151102_Polytron_R2502\
Done!

Flash Polytron R2507 White / Dark Gold ZT

 POLYTRON R2507 V5.2.6 20161217

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2507_V5.2.6_20161217
Model Ext   : POLYTRON R2507

Bahan :

    1. Download Firmware PAC Polytron R2507 White Gold ZT V5.2.6 20161217 atau Download Disini
     
    2. Download Firmware PAC Polytron R2507 Dark Gold ZT V5.2.7 20161223 atau Download Disini

    3. Download WAJIP PAKE SPD_Upgrade_Tool_R4.0.0001  Download Disini
    4.  Driver SPD by InfinityBox
    5. Tutorial Flash via research here
    6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Firmware Pac Polytron R2507 versi lain :

    Error pada research download baca disini

    Cara Flash R2507 via SPD UPGRADE TOOL

    Log read Firmware Polytron R2507 White Gold ZT
    Operation : Read FullFlash [ v1.25 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2507_V5.2.6_20161217
    Model Ext   : POLYTRON R2507
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : fbootlogo3.bin
    [Read Ok] : fbootlogo4.bin
    [Read Ok] : fbootlogo5.bin
    [Build Ok] : userdata.img
    AndroidInfo created
    Firmware Size : 2229 MiB
    Saved to : E:\polytron\New folder\SP7731GEA_HDR_device_5.1_POLYTRON_R2507_V5.2.6_20161217_POLYTRON_R2507\
    Done!

    Elapsed: 00:14:57

    Flash & Remove FRP Polytron L501 WHITE / BLACK TESTED

    Polytron L 501 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
    Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

    Brand     : POLYTRON_L501
    ProdName  : POLYTRON_L501
    ProdModel : POLYTRON_L501
    Device    : Android
    AndroidVer: 5.1
    MTKxCPU   : MT6735
    MTKxPRJ   : ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L

    TESTED BUAT :
    -Polytron L501 WHITE
    -Polytron L501 BLACK

     Bahan :

    1.  Download Firmware Polytron L501 FRP only v02 atau Download Disini
    2.  Download Full firmware + FRP Polytron L501 v02 atau Download Disini
    3.  Download Flash Tool DOWNLOAD DISINI
    4.  Driver bila belum punya instal dulu driver mtknya
    5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Versi Lain Polytron L501 :

    Cara Kerja :
    1. Buat remove verifikasi akun google Polytron L501 tinggal pake file FRP only (file ke 1), hanya centang pada tab FRP saja seperti video dibawah
    2.  Kalau mau full flash Polytron L501 pake file yang ke 2
    3. FULL FLASH WAJIB CENTANG DA DL ALL with Checksum pada Flash tool, . Setting : Flashtool=>option=>Download=>centang

    Cara Flash & remove FRP verifikasi akun google Polytron L501 via flash tool

     Log Read Firmware Polytron L 501
     Operation : Read Flash [ v1.46 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6735
    BB_CPU_NME : [MediaTek] MT6735_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x93
    NAND Flash : NOT INSTALLED
    eMMC Flash : 484A019065314738E93407055B986106
    Initialize Memory …
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , e1G8
    [eMMC] : FLASH_CID : 90014A4838473165050734E90661735B
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : DA90FBBBA64FE7083A7661193F696B75
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    xGPT : Normalize settings Ok!

    Brand     : POLYTRON_L501
    ProdName  : POLYTRON_L501
    ProdModel : POLYTRON_L501
    Device    : Android
    AndroidVer: 5.1
    MTKxCPU   : MT6735
    MTKxPRJ   : ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L

    [Read Ok] : preloader_bird6735m_35gu_a_l.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : logo.bin
    [Read Ok] : secro.img
    [Read Ok] : tz1.img
    [Read Ok] : tz2.img
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6735M / V1.1.2 / bird6735m_35gu_a_l / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 1661 MiB
    Scatter saved to : E:\andro 1\polytron\L 501\MT6735__POLYTRON_L501__POLYTRON_L501__Android__5.1__ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L\

    All done!

    Firmware Polytron W7430 BI Original

    Brand     : POLYTRON
    ProdName  : POLYTRON
    ProdModel : W7430
    Device    : POLYTRON
    AndroidVer: 4.2.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.JB5.MP.V1.6

    Bahan :

    1.  Download Firmware Stock Rom Polytron W7430 Original atau Download Disini
    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Flash  Polytron W7430 via Flash Tool

    Log Read Firmware Polytron W7430
    Operation : Read Flash [ v1.46 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 1501004E35575A4D4201C1CCC82AB03B
    Initialize Memory …
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
    [eMMC] : FLASH_CID : 1501004E35575A4D4201C1CCC82AB03B
    [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID    : 54B1FDC72E975F99180ABD80169AD021
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    Brand     : POLYTRON
    ProdName  : POLYTRON
    ProdModel : W7430
    Device    : POLYTRON
    AndroidVer: 4.2.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.JB5.MP.V1.6

    [Read Ok] : preloader_gionee82_wet_jb5.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : spdata.img
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6582 / V1.1.1 / gionee82_wet_jb5 / EMMC
    Android Info saved
    HWConfig Info saved
    FW Size : 1077 MiB
    Scatter saved to : F:\andro3\POLYTRON\w7430\MT6582__POLYTRON__W7430__POLYTRON__4.2.2__ALPS.JB5.MP.V1.6\

    All done!

    Flash Polytron R2501

    2501

    Polytron R2501 atau Polytron Rocket Lite R2501 juga termasuk hape yg sering mengalami bootloop.

    Salah satu solusi untuk mengobati hape anda yg bootloop ataupun matot bisa dengan flashing ataupun terserang virus. Langkah-langkah flashingnya sebagai berikut Lolipop:

    1.  Download firmwarenya stock rom Polytron R2501 ok scatternya  DOWNLOAD DISINI
    2.  Firmware Polytron R2501 Update kangsuper terbaru Download Disini
    3.  Download Flash Toolnya DOWNLOAD DISINI
    4.  Driver bila belum punya instal dulu driver mtknya
    5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
    6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi) , Mahar pulsa 10k

    Flash Polytron R2501


    Log Read Firmware Polytron R2501

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6582
    BB_CPU_HW : CB00
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6582_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v7.1533.03
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 700100563130303038067E5C672A429D
    DA Stat : v4.2 on BBID : 0x87
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0070 , OEM : 0100
    [eMMC] : FLASH_INF : [KINGSTON] , 80001
    [eMMC] : FLASH_CID : 700100563130303038067E5C672A429D
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001C3000000
    [eMMC] : FLASH_UCP : 7216 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    Reading Flash Conent now …
    Brand     : POLYTRON
    ProdName  : POLYTRON__R2501
    ProdModel : POLYTRON R2501
    Device    : POLYTRON
    AndroidVer: 5.0
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.L0.MP2.V1_BIRD6582.WT.A.L
    [Read Ok] : preloader_bird6582_wt_a_l.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    [Read Ok] : fat.img
    [ScatCFG] : MT6582 / V1.1.1 / bird6582_wt_a_l / EMMC
    FW Size : 1062 MiB
    Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__POLYTRON__POLYTRON_R2501__POLYTRON__5.0__ALPS.L0.MP2.V1_BIRD6582.WT.A.L\
    All done!

    syarat-dan-ketentuan

    Flash Polytron R2457 Black Gold & Black Gold ZT

     Polytron R2457 Rocket S2

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2457_V13_20160503
    Model Ext   : POLYTRON-R2457
     Note:
    Cek untuk R2457 black gold, atau untuk R2457 black gold ZT

    Bahan :
    1. Download Firmware PAC POLYTRON_R2457

    2. Download Research Download R2.10
    3. Driver SPD by InfinityBox
    4. Turorial Flash via research here
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Error pada research download baca disini

    Cara Flash Polytron R2457  via Research Download

    Log Read Firmware Polytron R2457
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2457_V13_20160503
    Model Ext   : POLYTRON-R2457

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1987 MiB
    Saved to : F:\andro3\POLYTRON\r2457\SP7731GEA_HDR_device_5.1_POLYTRON_R2457_V13_20160503_POLYTRON-R2457\
    Done!

    Flash Polytron R2406 SC7731

    Model Name  : P1923_PT
    Model Brand : Spreadtrum
    Model Device: P1923
    AndrVersion : 4.4.2
    BaseBand CPU: P1923
    Project Ver : POLYTRON_R2406_1300C_V1.0.8_20150918
    Model Ext   : POLYTRON_R2406

    Bahan :
    1. Download Firmware PAC Polytron R2406

    2. Download Firmware Polytron R2406 via Infinity CM2 DOWNLOAD DISINI
    3. Download Research Download R2.10
    4. Driver SPD by InfinityBox
    5. Tutorial Flash via research here
    6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Error pada research download baca disini

    Cara Flash Polytron R2406 via Research Download

    Log Read Firmware Polytron R2406
    Operation : Read FullFlash [ v1.20 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!

    [FW_READER] : Step #1 Passed!
    [FW_READER] : Step #2 Passed!
    [FW_READER] : Step #3 Passed!

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : P1923_PT
    Model Brand : Spreadtrum
    Model Device: P1923
    AndrVersion : 4.4.2
    BaseBand CPU: P1923
    Project Ver : POLYTRON_R2406_1300C_V1.0.8_20150918
    Model Ext   : POLYTRON_R2406

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x800.bin
    [Read Ok] : fblogo_480x800.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 838 MiB
    Saved to : F:\andro3\POLYTRON\r2406\P1923_P1923_4.4.2_POLYTRON_R2406_1300C_V1.0.8_20150918_POLYTRON_R2406\
    Done!