Fix Lenovo A7000-a Blank Putih Setelah Flash

Fix Lenovo A7000-a White Screen After Flash
Fix Lenovo A7000-a Blank LCD After Flash

Brand     : Lenovo
ProdName  : aio_row
ProdModel : Lenovo A7000-a
Device    : A7000-a
AndroidVer: 5.0
MTKxCPU   : MT6752
MTKxPRJ   : A7000-a_USR_S137_1505280741_MP6.V3_LENOVO6752_BMAIN_ROW

Bahan :
HARAP DIBACA NOTE DIBAWAH !!!
    1. Rom Buat fix Lenovo A7000-a blank putih after flash (Pilih salah satu saja)

   
    2. Firmware Stock Rom Marshmallow Lenovo A7000-a buat FRP, DKK atau Download Disini
    3. Download Flash Tool DOWNLOAD DISINI
    4. Driver bila belum punya instal dulu driver mtknya
    5. Untuk tutorial flash via Flash tool bisa dilihat DISINI
     Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

     NOTE :
    1. Buat Fix LenovoA7000-a LCD BLANK PUTIH after Flash Pakai file No. 1.1 
    anda bisa pake Firmware Upgrade
    2. WAJIB CENTANG DA DL ALL with Checksum pada Flash tool, kalau tidak A7000-a hanya akan bergetar setelah diflash. Setting : Flashtool=>option=>Download=>centang
    3. Bila pake Rom ke 1.2 yg gak ori, imei akan hilang, untuk Imei Hilang Tinggal write pake Chamelephone (ada di link tutorial), atau pake tool yg lain
    4. Buat FRP Lenovo A7000  bisa menggunakan file yg ke-2, bisa flash FRP only, atau lakukan Full flash, upgrade ke masrshmallow
    5. Buat yg malah Matot tidak getar, masuk tab format, tick validation, auto format & format whole flash, klik start. setelah itu flash centang semua (tested pake rom  no.2 Rom Marshmallow Lenovo A7000-a , bisa jg pake rom lain), jgn lupa centang ceksum, kalau tidak A7000-a hanya akan bergetar setelah diflash.kalau tidak A7000-a hanya akan bergetar setelah diflash.

    Cara Flash  Lenovo A7000 via Flash Tool

    Log Read Firmware Lenovo A7000-a A7000
    Operation : Read Flash [ v1.40 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6752
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6732|MT6752_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 150100523758314D4209D1FFD8FA5241
    DA Stat : v4.2 on BBID : 0x8F
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BM1X7
    [eMMC] : FLASH_CID : 150100523758314D4209D1FFD8FA5241
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Conent now …

    Brand     : Lenovo
    ProdName  : aio_row
    ProdModel : Lenovo A7000-a
    Device    : A7000-a
    AndroidVer: 5.0
    MTKxCPU   : MT6752
    MTKxPRJ   : A7000-a_USR_S137_1505280741_MP6.V3_LENOVO6752_BMAIN_ROW

    MediaTek MT67xx [x64] : Normalize settings Ok

    [Read Ok] : preloader_aio_row.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : tz1.img
    [Read Ok] : tz2.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6752 / V1.1.2 / aio_row / EMMC
    FW Size : 1937 MiB
    Scatter saved to : G:\InfinityBox\CM2MTK\Flash\lenovo a7000 pl\MT6752__Lenovo__Lenovo_A7000-a__A7000-a__5.0__A7000-a_USR_S137_1505280741_MP6.V3_LENOVO6752_BMAIN_ROW\

    All done!

    Repair Advan S35i Blank Putih Abis Flash

    Model Name  : n9_sc7715ga_0402
    Model Brand : ADVAN
    Model Device: Vandroid
    AndrVersion : 4.4.2
    BaseBand CPU: SCX15_SP7715GA
    Project Ver : S35i_WG3528_V0.2_20151210
    Model Ext   : S35i

    Setelah flash Advan S35i SC7715 malah menjadi Blank putih atau white screen, ini karena Advan S35i kita flash salah firmware atau salah rom. Seperti yang saya lakukan sendiri, saya salah flash menggunakan Rom dengan versi WG3528_S35i_SP7715_Flash512+256_4.4.2_20150911_B1.pac, alhasil jadi blank putih. Tested buat Advan S35i  seperti ss diatas. Tampilan Blank putih habis diflash seperti dibawah :
     

                                            Blank                                                abis repair

    Bahan :

    1. Download Firmware PAC Advan S35i atau Download Disini
    2. Download Research Download R2.10
    3. Driver SPD by InfinityBox
    4. Tutorial Flash via research here
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    -) Download Firmware Advan S35i versi lain  atau Download disini

    Error pada research download baca disini

    Flash Advan S35i via Research Download

    Log Read Firmware Advan S35i
     Operation : Read FullFlash [ v1.22 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7715 Loader NAND v1.1 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected NAND Flash , Structure detect Ok!

    [FW_READER] : Step #1 Passed!
    [FW_READER] : Step #2 Passed!
    [FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
    [FW_READER] : Step #3 Passed!
    Model Name  : n9_sc7715ga_0402
    Model Brand : ADVAN
    Model Device: Vandroid
    AndrVersion : 4.4.2
    BaseBand CPU: SCX15_SP7715GA
    Project Ver : S35i_WG3528_V0.2_20151210
    Model Ext   : S35i

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv_b256k.img
    [Read Ok] : nvitem_w.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : sc7715_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
    [Read Ok] : logo_320x480.bin
    [Read Ok] : fblogo_320x480.bin
    [Read Ok] : boot.img
    [Read Ok] : system_b256k.img
    [Read Ok] : cache_b256k.img
    [Read Ok] : recovery.img
    [Read Ok] : userdata_b256k.img

    AndroidInfo created
    Firmware Size : 328 MiB
    Saved to : F:\ADVAN\Advan S35i\REP BLANK PUTIH\SCX15_SP7715GA_[NAND_b256k]_Vandroid_4.4.2_S35i_WG3528_V0.2_20151210_S35i\
    Done!

    Elapsed: 00:06:59

    Repair Oppo R829 Blank After Flash

    Brand     : OPPO
    ProdName  : OPPO82_13075
    ProdModel : R829
    Device    : R829
    AndroidVer: 4.2.2
    MTKxCPU   : MT6582
    MTKxPRJ   : R829_11_A.09_140430

    Setelah flash Oppo R829 malah menjadi Blank putih atau white screen bergaris-garis, ini karena Oppo R829 kita flash salah firmware atau LK / UBOOT, tested buat Oppo R829 seperti ss diatas. Tampilan Blank putih habis diflash seperti dibawah :

    Bahan :

    1.  Download File LK / Uboot saja atau disini
    2.  Full Rom OPPO R829 Download Disni
    3.  Download Flash Tool DOWNLOAD DISINI
    4.  Driver bila belum punya instal dulu driver mtknya
    5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara :
    – Tinggal flash LK / UBOOT seperti video dibawah

     Flash Oppo R829 via Flash Tool

    Log Read info Oppo R829
    Operation : Check / Read Info [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 4 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A4841473464040502A1DB3A41ED
    Initialize Memory …
    DRAM configured from IDB!
    DRAM initialize passed!
    DRAM size : 0x40000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , d4GA
    [eMMC] : FLASH_CID : 90014A4841473464040502A1DB3A41ED
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB800000
    [eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
    DEV RID    : 0xA931556724B2DED71A063B15A156F301
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000 [1 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand     : OPPO
    ProdName  : OPPO82_13075
    ProdModel : R829
    Device    : R829
    AndroidVer: 4.2.2
    MTKxCPU   : MT6582
    MTKxPRJ   : R829_11_A.09_140430

    Done!

    Repair SPC S5 (sc7715) Blank Putih setelah Flash

    Model Name  : P1909W
    Model Brand : SPC
    Model Device: P1909W
    AndrVersion : 4.4.2
    BaseBand CPU: P1909W
    Project Ver : MocorDroid test-keys
    Model Ext   : S5

    Setelah flash SPC S5 SC7715 malah menjadi Blank putih atau white screen, ini karena SPC S5 kita flash salah firmware atau salah rom, tested buat SPC S5 seperti ss diatas. Tampilan Blank putih habis diflash seperti dibawah :

    Bahan :

    1. Download Firmware PAC SPC S5 SC 7715 P1909W atau Download Disini
    2. Download Research Download R2.10
    3. Driver SPD by InfinityBox
    4. Tutorial Flash via research here
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    -) Download Model SPC S5 seperti gambar dibawah  Firmware SPC S5 versi lain SPC S5 WAVE SC7715 SC2351 atau Download disini

    Error pada research download baca disini

    Cara Flash SPC S5 via Research Download

    Log Read Firmware SPC S5
    Operation : Read FullFlash [ v1.24 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected NAND Flash , Structure detect Ok!

    [FW_READER] : Step #1 Passed!
    [FW_READER] : Step #2 Passed!
    [FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
    [FW_READER] : Step #3 Passed!
    Model Name  : P1909W
    Model Brand : SPC
    Model Device: P1909W
    AndrVersion : 4.4.2
    BaseBand CPU: P1909W
    Project Ver : MocorDroid test-keys
    Model Ext   : S5

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv_b256k.img
    [Read Ok] : nvitem_w.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : sc7715_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : CP2._CP2_WCN_14C_W14.39_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo.bin
    [Read Ok] : fblogo.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : userdata.img

    Firmware Size : 271 MiB
    Saved to : G:\InfinityBox\CM2SPD\Flash\P1909W_[NAND_b256k]_P1909W_4.4.2_MocorDroid_test-keys_S5\
    Done!