Flash Advan S3 Build No : S3-V1.0-JB4.2 MTK6572

Brand     : ADVAN
ProdName  : ratech72_wet_rlk_lca
ProdModel : ADVAN S3
Device    : Android
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : G212_ADVAN_S3_D_V0.6_20140311_Z23

Bahan :

  1.  Download Firmware Advan S3 Build No : S3-V1.0-JB4.2 mt6572 atau Download Disini
  2.  Download Firmware Advan S3 MT6571 3501 atau Download Disini
  3. Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Untuk Advan S3 MT6571 yang di sticker ada tulisan 3501 silahkan pake Rom di bawah
 Download Firmware Advan S3 MT6571 atau Download Disini

Cara Flash Advan S3 Flash Tool

Log Read Firmware ADVAN S3 Build No : S3-V1.0-JB4.2
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 009800BC009000660076001500010000
eMMC Flash : NOT INSTALLED
Initialize Memory …
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0096 , [TOSHIBA] TYBC0A111557KC
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0015 0001
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID    : 363EF8A7538EE4F4459934EF769F5F43
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

[Read Ok] : preloader_ratech72_wet_rlk_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / ratech72_wet_rlk_lca / NAND
FW Size : 296 MiB

Brand     : ADVAN
ProdName  : ratech72_wet_rlk_lca
ProdModel : ADVAN S3
Device    : Android
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : G212_ADVAN_S3_D_V0.6_20140311_Z23

Android Info saved

Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6572_NAND_ADVAN__ADVAN S3__Android__4.2.2__G212_ADVAN_S3_D_V0.6_20140311_Z23

Flash SPC Phantom S3 SC7715

Model Name  : n9_sc7715ga_0402
Model Brand : Spreadtrum
Model Device: n9_sc7715ga_0402
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : T6_0402_150617
Model Ext   : S3

Bahan :
1. Download Firmware PAC SPC Phantom S3 SC7715 T6

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash SPC Phantom S3 via Research Download

Log Read Firmware SPC Panthom S3
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!

Model Name  : n9_sc7715ga_0402
Model Brand : Spreadtrum
Model Device: n9_sc7715ga_0402
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : T6_0402_150617
Model Ext   : S3
spc panthom
 
[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : fblogo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 294 MiB
Saved to : F:\andro3\spc\s3 phantom\SCX15_SP7715GA_[NAND_b256k]_n9_sc7715ga_0402_4.4.2_T6_0402_150617_S3\
Done!