Repair SPC S5 (sc7715) Blank Putih setelah Flash

Model Name  : P1909W
Model Brand : SPC
Model Device: P1909W
AndrVersion : 4.4.2
BaseBand CPU: P1909W
Project Ver : MocorDroid test-keys
Model Ext   : S5

Setelah flash SPC S5 SC7715 malah menjadi Blank putih atau white screen, ini karena SPC S5 kita flash salah firmware atau salah rom, tested buat SPC S5 seperti ss diatas. Tampilan Blank putih habis diflash seperti dibawah :

Bahan :

1. Download Firmware PAC SPC S5 SC 7715 P1909W atau Download Disini
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Tutorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

-) Download Model SPC S5 seperti gambar dibawah  Firmware SPC S5 versi lain SPC S5 WAVE SC7715 SC2351 atau Download disini

Error pada research download baca disini

Cara Flash SPC S5 via Research Download

Log Read Firmware SPC S5
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name  : P1909W
Model Brand : SPC
Model Device: P1909W
AndrVersion : 4.4.2
BaseBand CPU: P1909W
Project Ver : MocorDroid test-keys
Model Ext   : S5

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.39_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo.bin
[Read Ok] : fblogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

Firmware Size : 271 MiB
Saved to : G:\InfinityBox\CM2SPD\Flash\P1909W_[NAND_b256k]_P1909W_4.4.2_MocorDroid_test-keys_S5\
Done!

Flash SPC Phantom S3 SC7715

Model Name  : n9_sc7715ga_0402
Model Brand : Spreadtrum
Model Device: n9_sc7715ga_0402
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : T6_0402_150617
Model Ext   : S3

Bahan :
1. Download Firmware PAC SPC Phantom S3 SC7715 T6

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash SPC Phantom S3 via Research Download

Log Read Firmware SPC Panthom S3
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!

Model Name  : n9_sc7715ga_0402
Model Brand : Spreadtrum
Model Device: n9_sc7715ga_0402
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : T6_0402_150617
Model Ext   : S3
spc panthom
 
[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : fblogo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 294 MiB
Saved to : F:\andro3\spc\s3 phantom\SCX15_SP7715GA_[NAND_b256k]_n9_sc7715ga_0402_4.4.2_T6_0402_150617_S3\
Done!

Flash Mito A82 SC7715 / SC7731 / SC7731C

Sorry gak buat ss, keburu diambil.

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Spreadtrum
Device Model   : scx15_sp7715ea
Device CPU     : scx15_sp7715ea
Device IntName : scx15_sp7715eaplus
Device Version : 4.4.2
Device Compile : 4/15/2015 2:49:22 AM
Device Project : KOT49H test-keys
Device ExtInfo : MITO_A82

Bahan :

1. Download Fimware PAC  MITO A82 SC7715

    2. Download Fimware PAC  MITO A82 SC7731

     3. Download Fimware PAC  MITO A82 SC7731C

    penampakan mito a82 sc7731c seperti dibawah

    4. Download Research Download R2.10
    5. Driver SPD by InfinityBox
    6. Turorial Flash via research here
    7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k, PASS SAMA SEMUA

    Error pada research download baca disini

    Flash Mito A82 Research Download

     

    Video Flash Mito A82 Via CM2

    Log Read Firmware Mito A82 SC7715
    Operation : Read FullFlash [ v1.16 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7715 eMMC loader v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!

    [FW_READER] : Step #1 Passed!
    [FW_READER] : Step #2 Passed!
    [FW_READER] : Step #3 Passed!

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7715 eMMC loader v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : scx15_sp7715eaplus
    Model Brand : Spreadtrum
    Model Device: scx15_sp7715ea
    AndrVersion : 4.4.2
    BaseBand CPU: SCX15_SP7715EA
    Project Ver : KOT49H test-keys
    Model Ext   : MITO_A82

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : nvitem_w.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : sc7715_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : sc7715_modem_sc7715_cp2.bin
    [Read Ok] : logo_480x800.bin
    [Read Ok] : fblogo_480x800.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 686 MiB
    Saved to : G:\andro3\mito\mito a82 7715\SCX15_SP7715EA_scx15_sp7715ea_4.4.2_KOT49H_test-keys_MITO_A82\
    Done!

    Elapsed: 00:05:01