Firmware Maxtron V15 SPD

Model Name  : V15

Model Brand : MAXTRON

Model Device: V15

AndrVersion : 7.0

BaseBand CPU: MAXTRON

Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932

Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (-)

Cara Flash Mxtron V15 via Research Download

Log Read Firmware Maxtron V15

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

syarat-dan-ketentuan

BYPASS FRP Mito A990 ~ Verifikasi Akun Google

FRP Mito A990 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Model Name  : MITO A990
Model Brand : MITO
Model Device: MITO-A990
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
CompileDate : 9/25/2017 7:50:18 AM
Project Ver : MITO_A990_25092017_V05
Model Ext   : MITO A990

A. BYPASS FRP ONLY ukuran PAC 1 MB

B. Firmware PAC FULL

Tool :

  1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
  • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
  • Boot volume (-)
  • BYPASS FRP Sinyal Aman

 Cara Flash Mito A990 via Research Download

Log Read Info Firmware Mito A990
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : MITO A990
Model Brand : MITO
Model Device: MITO-A990
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
CompileDate : 9/25/2017 7:50:18 AM
Project Ver : MITO_A990_25092017_V05
Model Ext   : MITO A990

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:14

Flash & Bypass FRP Evercoss A75B V09 SC7731C

 FRP Evercoss A75B Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
Model Name  : EVERCOSS_A75B
Model Brand : EVERCOSS
Model Device: EVERCOSS_A75B
AndrVersion : 7.0
BaseBand CPU: SP7731CEA
CompileDate : 11/8/2017 11:09:19 AM
Project Ver : EVERCOSS_A75B_V09_7.0_08112017
Model Ext   : A75B

Bahan :

Evercoss A75B V09 PAC FILE

A. BYPASS FRP ONLY / BYPASS AKUN GOOGLE

    Download Firmware PAC  Evercoss A75B FRP ONLY V09   atau  Download Disini (1MB)

B. Firmware PAC FULL PLUS BYPASS FRP Evercoss A75B V09

    Download Firmware PAC  Evercoss A75B FULL plus FRP V09  atau  Download Disini

C. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini

D. Tutorial Flash via research here

E. Driver SPD by InfinityBox

F. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

PAC Bypass FRP Evercoss A75B Versi Lain

Cara Kerja :

  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
  • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
  • Boot volume (- /+)
  • Flash  Evercoss A75B via research Download, flash aja dgn rom diatas + BYPASS FRP
  •  BYPASS FRP Sinyal Aman

 Video Cara Bypass FRP Evercoss A75B

Video Cara Flash Evercoss A75B

Log Read Info Evercoss A75B
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 20 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : EVERCOSS_A75B
Model Brand : EVERCOSS
Model Device: EVERCOSS_A75B
AndrVersion : 7.0
BaseBand CPU: SP7731CEA
CompileDate : 11/8/2017 11:09:19 AM
Project Ver : EVERCOSS_A75B_V09_7.0_08112017
Model Ext   : A75B

ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!!

Elapsed: 00:00:35

Flash & Firmware Strawberry ST9119 ~ SPD SC7731C

Brand           : strawberry
Phone Model     : ST9119
Android Ver     : 6.0
CPU/Processor   : SP7731C_V1.0.0
SPD Project ver : sp7731c_fs285_32v4_project-user 6.0 MRA58K eng.xdbf10.20170909.110020 SW Version      : STRAWBERRY_ST9119_V05_20170909_1059

Bahan :

  1.  Download Firmware PAC Strawberry ST9119 V05 atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Firmware Strawberry ST9119 versi lain :

Note :
1. Boot volume +/-

 Cara Flash Strawberry ST9119 via Research Download

Log Read Firmware Strawberry ST9119
Action : Read PAC
 Boot : SC7731C-EMMC
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb….
 Phone found : SPRD U2S Diag (COM7)
 Connecting…
 Bootstrap: SPRD3
 Connected done.
 sending 1st boot…
 waiting for ack…
 1st boot done.
 Sending 2nd boot…
 2nd boot done.
 Checking H/W report info…
 Read info is done.

 Reading Project Property …

 Brand           : strawberry
 Phone Model     : ST9119
 Android Ver     : 6.0
 CPU/Processor   : SP7731C_V1.0.0
 SPD Project ver : sp7731c_fs285_32v4_project-user 6.0 MRA58K eng.xdbf10.20170909.110020 release-keys
 SW Version      : STRAWBERRY_ST9119_V05_20170909_1059
 Making dir: E:\andro 1\strawberry\st9119\spd_7731C_EMMC_strawberry_ST9119_Android6.0_STRAWBERRY_ST9119_V05
_20170909_1059_20180628_201506\…[ok]…[ok]…[ok]

 Dumping Flash Image Now…
 Reading splloader…ok
 Reading uboot…ok
 Reading recovery…ok
 Reading system…ok
 Reading userdata…ok
 Reading cache…ok
 Reading misc…ok
 Reading boot…ok
 Reading wmodem…ok
 Reading wdsp…ok
 Reading wfixnv1…ok
 Reading wcnfixnv1…ok
 Reading wcnmodem…ok
 Reading prodnv…ok
 Reading sysinfo…ok
 Reading sysinfo…ok
 Reading logo…ok
 Reading fbootlogo…ok
 Packing …
 Copying file: splloader…ok
 Copying file: uboot…ok
 Copying file: recovery…ok
 Copying file: system…ok
 Copying file: userdata…ok
 Copying file: cache…ok
 Copying file: boot…ok
 Copying file: wmodem…ok
 Copying file: wdsp…ok
 Copying file: wfixnv1…ok
 Copying file: wcnfixnv1…ok
 Copying file: wcnmodem…ok
 Copying file: prodnv…ok
 Copying file: sysinfo…ok
 Copying file: sysinfo…ok
 Copying file: logo…ok
 Copying file: fbootlogo…ok
 Creating XML Settings …ok
 Rebuilding Packet Header …ok
 Deleting TmpDir…ok
 BinPacket saved to: E:\andro 1\strawberry\st9119\CSTool_spd_7731C_EMMC_strawberry_ST9119_Android6.0
_STRAWBERRY_ST9119_V05_20170909_1059_20180628_201506.pac
 All done

 Action completed
 Time taken : 00:16:36

Flash Advan S4T SC7731 & SC7731C

Model Name  : S4T
Model Brand : ADVAN
Model Device: S4T
AndrVersion : 5.1.2
BaseBand CPU: S4T
Project Ver : S4T_WG4036_V0.5_20160406
Model Ext   : S4T

Bahan :

  1.  Download Firmware PAC ADVAN S4T V0.5 atau  Download Disini
  2.  Download Firmware PAC ADVAN S4T V1.2 atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume UP
2. Buat cek versi V05 atau V1.2 flash saja, bila tidak jalan berarti versi satunya

Cara Flash Advan S4T via Research Download

Log Read Firmware Advan S4T
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : S4T
Model Brand : ADVAN
Model Device: S4T
AndrVersion : 5.1.2
BaseBand CPU: S4T
Project Ver : S4T_WG4036_V0.5_20160406
Model Ext   : S4T

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1276 MiB
Saved to : F:\ADVAN\ADVAN S4T\v05 ok\S4T_S4T_5.1.2_S4T_WG4036_V0.5_20160406_S4T\
Done!