Download Firmware Polytron P551S scatter file

 NO SS, CEK LOG

Patch Level    : O11019
Display ID     : A888_03G_P551S_BAND18_FHD_V18_20181016_1340
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-10-05
Build Time     : 02.11.2018
Product Model  : P551S
Product Brand  : Polytron
Product Name   : P551S
Product Device : P551S
Product Board  : mt6753
Product Manfct : Polytron
Product Info   : POLYTRON_P551S
Product Board  : k53v1_bsp
Board Platform : mt6753

Bahan :
1. Download Firmware Polytron P551S scatter file
 Download Rom Firmware Polytron P551S

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

LOG READ FIRMWARE Polytron P551S

Operation : Read Firmware [ v2.16 ]

ExtSparse : Enabled
ForceRead : Disabled

  1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
  2. Insert USB cable in phone
    Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x02
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 90014A484247346132A56100409725FB
DAInf: 4 : 2 : 155
DA : DRAM ready!
DA : BOOT to 2nd DA …
DA : Receiving HW info

    EMMC: 90014A484247346132A56100409715FB
    EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
    EMMC:
          BOOT1  : 0x00400000 [ 4.00 MB ]
          BOOT2  : 0x00400000 [ 4.00 MB ]
          RPMB   : 0x00400000 [ 4.00 MB ]
          USER   : 0x747C00000 [ 29.12 GB ]

    SRAM: 0x00020000 [ 128.00 KB ]
    DRAM: 0xC0000000 [ 3.00 GB ]

    CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

    RNID : 826B25E7283A32364E00D12D925197CE

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : A888_03G_P551S_BAND18_FHD_V18_20181016_1340
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-10-05
Build Time : 02.11.2018
Product Model : P551S
Product Brand : Polytron
Product Name : P551S
Product Device : P551S
Product Board : mt6753
Product Manfct : Polytron
Product Info : POLYTRON_P551S
Product Board : k53v1_bsp
Board Platform : mt6753

MT6753__Polytron__P551S__8.1.0__A888_03G_P551S_BAND18_FHD_V18_20181016_1340__O11019__POLYTRON_P551S

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 63%
Read : system.img
ExtSparse : Compression ratio : 41%
Read : cache.img
Read : userdata.img

FW Size : 1.70 GB
Android Info saved : _Android_info.txt
Scatter : MT6753_Android_scatter.txt
Saved to : E:\polytron\polytron p551s\MT6753__Polytron__P551S__8.1.0__A888_03G_P551S_BAND18_FHD_V18_20181016_1340__O11019__POLYTRON_P551S\

Done!
Elapsed: 00:07:55

Firmware Flash HOTWAV SYMBOL MAX Scatter File

 Patch Level    : O11019
Display ID     : D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 1543481090
Product Model  : Symbol Max
Product Brand  : HOTWAV
Product Name   : Symbol_Max
Product Device : Symbol_Max
Product Manfct : HOTWAV
Product Info   : d3966_2g
Product Board  : d3966_2g
Board Platform : mt6739

Bahan :
1. Download Firmware HOTWAV SYMBOL MAX Scatter File

2. Tested Via CM2, SP-Flash-Tool blm test Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 NOTE :

TESTED CM2 V2.10 BASE _V1952

 Log Read Firmware HOTWAV SYMBOL MAX Scatter File

Operation : Read Firmware [ v2.10 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
BROM : SOCID : 18D614CB6DB62B6D0D30F509A26C7E198711BAA1404205F5DC2033E1700E8A03
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 90014A484147326550704D754056347
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HAG2e
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 9CCD730DF34B552ED6502BBE4086BABC

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 1543481090
Product Model  : Symbol Max
Product Brand  : HOTWAV
Product Name   : Symbol_Max
Product Device : Symbol_Max
Product Manfct : HOTWAV
Product Info   : d3966_2g
Product Board  : d3966_2g
Board Platform : mt6739

MT6739__HOTWAV__Symbol_Max__8.1.0__D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05__O11019__d3966_2g

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 45%
Read : system.img
ExtSparse : Compression ratio : 14%
Read : cache.img
Read : userdata.img
Read : sdrpmb.img

FW Size  : 2.58 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\ANDROID LAIN2\hot wave\symbol max\MT6739__HOTWAV__Symbol_Max__8.1.0__D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05__O11019__d3966_2g\

Done!
Elapsed: 00:05:19

Flash & Firmware Moto C+ XT1721

Bahan :

1. Download  Firmware Moto C+ XT1721

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini

4. Driver bila belum punya instal dulu driver mtknya

5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

1. SET PADA SPFT DOWNLOAD AGENT PILIH FILE SP_Flash_Tool_5.1644_M1\DA_SWSEC.bin , cek SS dibawah

2.  Moto c+ XT1721

3. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Flash MOTO C+ XT1721 via Flash Tool


 

23456-syarat2bdan2bketentuan

Firmware & Bypass FRP Advan S7D E1C NXT

BYPASS FRP Advan S7D E1C NXT  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

platform: MT6580, cpu abi: armeabi-v7a

manufacturer: ADVAN

board: S7D, name: ADVAN_E1C_NXT

brand: ADVAN, model: S7D

build id: NRD90M, version: 7.0 Nougat (E1C_NXT_GW7009_V5.0_20171215)

build description: full_advan8321_7009-user 7.0 NRD90M 1513648960 release-keys

Bahan :

1. Download  Firmware Advan S7D E1C NXT

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini

4. Driver bila belum punya instal dulu driver mtknya

5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

1. Buat remove FRP verifikasi akun google  Advan S7D E1C NXT, hanya centang pada tab FRP, silahkan lihat video dibawah

2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Bypass FRP Only Advan S7D E1C NXT

Log Read Firmware Advan S7D E1C NXT

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 17 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E36324D4203FDADF2F0A4E1
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM26N
[eMMC] : FLASH_CID : 150100464E36324D4203FDADF2F0A4E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD19C56D823D19DD59BB3F9172
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ADVAN
ProdName  : ADVAN_E1C_NXT
ProdModel : S7D
Device    : ADVAN_E1C_NXT
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P31

[Read Ok] : preloader_advan8321_7009.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / advan8321_7009 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3014 MiB
Scatter saved to : E:\ADVAN\advan e1c nxt\MT6580__ADVAN__S7D__ADVAN_E1C_NXT__7.0__alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P31\

All done!

syarat-dan-ketentuan

 

Bypass FRP Advan E1C 3G & Flash E1C 3G V16 EMMC

FRP Advan E1C 3G  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Brand     : ADVAN
ProdName  : E1C_3G
ProdModel : E1C_3G
Device    : ADVAN_E1C_3G
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.52_miki8321.tb.m_P1

Bahan :
1. Download Rom

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Advan E1C 3G via Flash Tool

 Log Read Flash Advan E1C 3G
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 17 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E58324D42016C2EEEFB2453
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D42016C2EEEFB2453
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD7669B42AFB08AE77DFDA79DB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ADVAN
ProdName  : E1C_3G
ProdModel : E1C_3G
Device    : ADVAN_E1C_3G
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.52_miki8321.tb.m_P1

[Read Ok] : preloader_advan8321_9719e.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / advan8321_9719e / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2255 MiB
Scatter saved to : E:\ADVAN\ADVAN E1C 3G\v16 emmc ok\New folder\MT6580__ADVAN__E1C_3G__ADVAN_E1C_3G__6.0__alps-mp-m0.mp1-V2.52_miki8321.tb.m_P1\

All done!

Firmware Luna G55 elevate V024

Firmware Luna G55 versi V024

Brand     : LUNA
ProdName  : ELEVATE
ProdModel : G55
Device    : G55
AndroidVer: 6.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-m0.mp7-V2.3.1_6755.66.sz.m_P4

Bahan :
1.Download  Firmware Luna G55 V024 atau Download Disini
2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Log Read Firmaware Luna G55
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 7 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GB
[eMMC] : FLASH_CID : 90014A484247346132A5196B8D32140F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xFCC4CFBD853B33FFE186E8C5FF24EC6F
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : LUNA
ProdName  : ELEVATE
ProdModel : G55
Device    : G55
AndroidVer: 6.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-m0.mp7-V2.3.1_6755.66.sz.m_P4

[Read Ok] : preloader_wt6755_66_sz_m.bin
[Read Ok] : recovery.img
[Read Ok] : custom.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / wt6755_66_sz_m / EMMC
Android Info saved
HWConfig Info saved
FW Size : 4660 MiB
Scatter saved to : F:\luna\MT6755__LUNA__G55__G55__6.0__alps-mp-m0.mp7-V2.3.1_6755.66.sz.m_P4\

All done!

Flash & Bypass FRP Himax Y13 ~ L112 & L124

FRP Himax Y13  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Brand     : Himax
ProdName  : Y13
ProdModel : Y13
Device    : E3658
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : E3658_DE36581_HIMAX-Y13_L124

Bahan :
1. Download Rom

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Himax Y13 via Flash Tool

Log Read Firmware Himax Y13
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 25 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D420008569A5C93FF
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D420008569A5C93FF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD14A4B4D14E0B3767D11EF924
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Himax
ProdName  : Y13
ProdModel : Y13
Device    : E3658
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : E3658_DE36581_HIMAX-Y13_L124

[Read Ok] : preloader_e3658.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / e3658 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2105 MiB
Scatter saved to : D:\himax\y13\MT6580__Himax__Y13__E3658__6.0__E3658_DE36581_HIMAX-Y13_L124\

All done!

Flash & Firmware Alcatel One Touch Flash Plus

Brand     : TCL
ProdName  : ALCATEL_ONETOUCH_Flash_Plus
ProdModel : ALCATEL ONETOUCH Flash Plus
Device    : CROSS2
AndroidVer: 4.4.4
MTKxCPU   : MT6752
MTKxPRJ   : ALCATEL_ONETOUCH_Flash_Plus_V1.0

Bahan :
1. Download  Firmware Alcatel One Touch Flash Plus atau Download Disini
2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Firmware Alcatel One Touch Flash Plus via Flash Tool

Log Read Firmware Firmware Alcatel One Touch Flash Plus
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 13 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6752
BB_CPU_NME : [MediaTek] MT6732|MT6752_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x8F
NAND Flash : NOT INSTALLED
eMMC Flash : 150100523832314D42008529EE3342CB
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D42008529EE3342CB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBDDF9C1196C16866AE52BA23C0
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : TCL
ProdName  : ALCATEL_ONETOUCH_Flash_Plus
ProdModel : ALCATEL ONETOUCH Flash Plus
Device    : CROSS2
AndroidVer: 4.4.4
MTKxCPU   : MT6752
MTKxPRJ   : ALCATEL_ONETOUCH_Flash_Plus_V1.0

[Read Ok] : preloader_cross2_apac.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6752 / V1.1.2 / cross2_apac / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2205 MiB
Scatter saved to : D:\alcatel\alcatel ot flash plus\MT6752__TCL__ALCATEL_ONETOUCH_Flash_Plus__CROSS2__4.4.4__ALCATEL_ONETOUCH_Flash_Plus_V1.0\

Firmware Lenovo A858 BI / Bahasa Indonesia / Multilanguage

Brand     : Lenovo
ProdName  : A858
ProdModel : Lenovo A858
Device    : A858
AndroidVer: 4.4.4
MTKxCPU   : MT6752

Bahan :
1.bisa pake rom 1 tau 2

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Log Read Firmware Lenovo A858
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 7 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6752
BB_CPU_NME : [MediaTek] MT6732|MT6752_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x8F
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513758534142011589E753A1DF
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142011589E753A1DF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDC71F9910D7111F5CB9591AEC
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Lenovo
ProdName  : A858
ProdModel : Lenovo A858
Device    : A858
AndroidVer: 4.4.4
MTKxCPU   : MT6752
MTKxPRJ   : A858

[Read Ok] : preloader_huaqin6752_lwt_b1a_cu.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6752 / V1.1.2 / huaqin6752_lwt_b1a_cu / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1268 MiB
Scatter saved to : D:\ANDROID\lenovo 2\lenovo\a858\MT6752__Lenovo__Lenovo_A858__A858__4.4.4_MP13V11_BMAIN\

All done!

Flash Xiaomi NOTE 1W 4G 2014022 MT6582

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.5
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.JB5.MP.V1.13

Bahan :
1. Download  Firmware Xiaomi Note 1W 2014022 atau Download Disini
2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Xiaomi NOTE 1W 4G  via Flash Tool

Log Read Firmware Xiaomi NOTE 1W 4G 2014022
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 6 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034474530019BD2C17FC115
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 110100303034474530019BD2C17FC115
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 796C7A55045FDA1DA528F69DD1E897D6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.5
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.JB5.MP.V1.13

[Read Ok] : preloader_fars82_wet_v113_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / fars82_wet_v113_jb5 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 808 MiB
Scatter saved to : E:\andro3\xiaomi\2014022\New folder (3)\MT6592__Xiaomi__HM_NOTE_1W__lcsh92_wet_jb9__4.4.5__ALPS.JB5.MP.V1.13\

All done!