FIRMWARE & FLASH Advan i7U G711A_L68

FRP Advan i7u ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Patch Level    : NRD90M
Display ID     : i7U_SL718A_V1.0_20180410
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1523356407
Product Model  : i7U
Product Brand  : ADVAN
Product Name   : i_Lite
Product Device : ADVAN_i_Lite
Product Board  : sp9850ka_1h10
Product Manfct : ADVAN
Board Platform : sp9850ka
Product Info   : sp9850ka_1h10

A. BYPASS FRP ONLY ukuran PAC 1 MB

  1. Download Firmware PAC_Advan i7U_BYPASS_FRP_only  atau  Download Disini (1MB)

B. Firmware PAC FULL

  1. Download FULL PAC sp9850ka_1h10_Advan_i7U_SL718A_V1.0_20180508 atau Download disini

Tool :

  1. Download SPD_Upgrade_Tool_R4.0.0001 atau Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

    • Untuk FRP Evercoss Advan i7U tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
    • Boot volume (+/-)

 Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : PAC : sp9850ka_1h10_Advan_i7U_BYPASS_FRP_LOCK.pac
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : NRD90M
Display ID     : i7U_SL718A_V1.0_20180410
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1523356407
Product Model  : i7U
Product Brand  : ADVAN
Product Name   : i_Lite
Product Device : ADVAN_i_Lite
Product Board  : sp9850ka_1h10
Product Manfct : ADVAN
Board Platform : sp9850ka
Product Info   : sp9850ka_1h10

Done!
Elapsed: 00:06:31

912ac-syarat2bdan2bketentuan

 

Cara Flash AXIOO AX7 S5T via Research Download

Model Name  : Axioo_AX7

Model Brand : Axioo

Model Device: Axioo_AX7

AndrVersion : 6.0

BaseBand CPU: SP9832A_2H11_VOLTE

Project Ver : Axioo_S5T_GSC0_SW20171108

Model Ext   : Axioo_AX7

Tool & Bahan :

  1. Download Firmware PAC Axioo AX7 S5T Tablet atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (+-)

Cara Flash AXIOO AX7 S5T via Research Download

Log Read Firmware Axioo S5T

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX7
Model Brand : Axioo
Model Device: Axioo_AX7
AndrVersion : 6.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_S5T_GSC0_SW20171108
Model Ext   : Axioo_AX7

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_600x1024.bin
[Read Ok] : fblogo_600x1024.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2102 MiB
Saved to : D:\axioo\axioo s5t\stock rom axioo s5t\SP9832A_2H11_VOLTE_Axioo_AX7_6.0_Axioo_S5T_GSC0_SW20171108_Axioo_AX7\
Done!

912ac-syarat2bdan2bketentuan

 

Firmware & Flash Axioo PICOpad 7H2 / PICOpad_S2L

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

Tool & Bahan :

  1. Download Firmware PAC AXIOO PICOPAD 7H2 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash AXIOO PICOPAD 7H2 via Research Download

Log Read Info AXIOO PICOPAD 7H2
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 5 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:12 

Firmware Maxtron V15 SPD

Model Name  : V15

Model Brand : MAXTRON

Model Device: V15

AndrVersion : 7.0

BaseBand CPU: MAXTRON

Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932

Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (-)

Cara Flash Mxtron V15 via Research Download

Log Read Firmware Maxtron V15

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

syarat-dan-ketentuan

Flash & Firmware Maxtron V15 SPD

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash Maxtron V15 via Research Download

Log Read Firmware Maxtron V15 
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

Flash & Firmware Strawberry ST7701 SPD

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

Tool & Bahan :

  1. Download Firmware PAC Strawberry ST 7701 FS066_CF8_LS019_ST7701_L12819_16B  atau Download Disini
  2. Download Firmware PAC Strawberry ST 7701  SP7731GEA_HDR_ST7701_6.0_LS019_INDB_V02 atau Download Disini
  3. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4. Tutorial Flash via research here
  5. Driver SPD by InfinityBox
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume +-

Cara Flash Strawberry ST7701 via Research Download

Log Read Firmware Strawberry ST7701
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1555 MiB
Saved to : E:\STRAWBERRY\New folder\SP7731GEA_HDR_ST7701_6.0_FS066_CF8_LS019_ST7701_L12819_16B_ST7701\
Done!

Flash & Firmware Strawberry ST9119 ~ SPD SC7731C

Brand           : strawberry
Phone Model     : ST9119
Android Ver     : 6.0
CPU/Processor   : SP7731C_V1.0.0
SPD Project ver : sp7731c_fs285_32v4_project-user 6.0 MRA58K eng.xdbf10.20170909.110020 SW Version      : STRAWBERRY_ST9119_V05_20170909_1059

Bahan :

  1.  Download Firmware PAC Strawberry ST9119 V05 atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Firmware Strawberry ST9119 versi lain :

Note :
1. Boot volume +/-

 Cara Flash Strawberry ST9119 via Research Download

Log Read Firmware Strawberry ST9119
Action : Read PAC
 Boot : SC7731C-EMMC
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb….
 Phone found : SPRD U2S Diag (COM7)
 Connecting…
 Bootstrap: SPRD3
 Connected done.
 sending 1st boot…
 waiting for ack…
 1st boot done.
 Sending 2nd boot…
 2nd boot done.
 Checking H/W report info…
 Read info is done.

 Reading Project Property …

 Brand           : strawberry
 Phone Model     : ST9119
 Android Ver     : 6.0
 CPU/Processor   : SP7731C_V1.0.0
 SPD Project ver : sp7731c_fs285_32v4_project-user 6.0 MRA58K eng.xdbf10.20170909.110020 release-keys
 SW Version      : STRAWBERRY_ST9119_V05_20170909_1059
 Making dir: E:\andro 1\strawberry\st9119\spd_7731C_EMMC_strawberry_ST9119_Android6.0_STRAWBERRY_ST9119_V05
_20170909_1059_20180628_201506\…[ok]…[ok]…[ok]

 Dumping Flash Image Now…
 Reading splloader…ok
 Reading uboot…ok
 Reading recovery…ok
 Reading system…ok
 Reading userdata…ok
 Reading cache…ok
 Reading misc…ok
 Reading boot…ok
 Reading wmodem…ok
 Reading wdsp…ok
 Reading wfixnv1…ok
 Reading wcnfixnv1…ok
 Reading wcnmodem…ok
 Reading prodnv…ok
 Reading sysinfo…ok
 Reading sysinfo…ok
 Reading logo…ok
 Reading fbootlogo…ok
 Packing …
 Copying file: splloader…ok
 Copying file: uboot…ok
 Copying file: recovery…ok
 Copying file: system…ok
 Copying file: userdata…ok
 Copying file: cache…ok
 Copying file: boot…ok
 Copying file: wmodem…ok
 Copying file: wdsp…ok
 Copying file: wfixnv1…ok
 Copying file: wcnfixnv1…ok
 Copying file: wcnmodem…ok
 Copying file: prodnv…ok
 Copying file: sysinfo…ok
 Copying file: sysinfo…ok
 Copying file: logo…ok
 Copying file: fbootlogo…ok
 Creating XML Settings …ok
 Rebuilding Packet Header …ok
 Deleting TmpDir…ok
 BinPacket saved to: E:\andro 1\strawberry\st9119\CSTool_spd_7731C_EMMC_strawberry_ST9119_Android6.0
_STRAWBERRY_ST9119_V05_20170909_1059_20180628_201506.pac
 All done

 Action completed
 Time taken : 00:16:36