Firmware Strawberry ST388 ~SPD PAC File

Model Name  : ws607_al888_strawberry

Model Brand : STRAWBERRY

Model Device: ws607

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : WS607_TS_AL888_STRAWBERRY_V0.8_20170524

Model Ext   : ST388

Tool :

  1. Download Firmware PAC Strawberry ST388 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Boot volume (+/-)

Cara Flash Strawberry ST-388  via Research Download

Log Read Flash Strawberry ST 388

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : ws607_al888_strawberry
Model Brand : STRAWBERRY
Model Device: ws607
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : WS607_TS_AL888_STRAWBERRY_V0.8_20170524
Model Ext   : ST388

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : feature.img
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1847 MiB
Saved to : E:\STRAWBERRY\st388\SP7731CEB_ws607_6.0_WS607_TS_AL888_STRAWBERRY_V0.8_20170524_ST388\
Done!

syarat-dan-ketentuan

Flash & Firmware Strawberry ST7701 SPD

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

Tool & Bahan :

  1. Download Firmware PAC Strawberry ST 7701 FS066_CF8_LS019_ST7701_L12819_16B  atau Download Disini
  2. Download Firmware PAC Strawberry ST 7701  SP7731GEA_HDR_ST7701_6.0_LS019_INDB_V02 atau Download Disini
  3. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4. Tutorial Flash via research here
  5. Driver SPD by InfinityBox
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume +-

Cara Flash Strawberry ST7701 via Research Download

Log Read Firmware Strawberry ST7701
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1555 MiB
Saved to : E:\STRAWBERRY\New folder\SP7731GEA_HDR_ST7701_6.0_FS066_CF8_LS019_ST7701_L12819_16B_ST7701\
Done!

Flash Strawberry ST388 ~SPD PAC File

Model Name  : ws607_al888_strawberry
Model Brand : STRAWBERRY
Model Device: ws607
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : WS607_TS_AL888_STRAWBERRY_V0.8_20170524
Model Ext   : ST388

Tool :

  1. Download Firmware PAC Strawberry ST388 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Boot volume (+/-)

Cara Flash Strawberry ST-388  via Research Download

Log Read Flash Strawberry ST 388
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : ws607_al888_strawberry
Model Brand : STRAWBERRY
Model Device: ws607
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : WS607_TS_AL888_STRAWBERRY_V0.8_20170524
Model Ext   : ST388

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : feature.img
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1847 MiB
Saved to : E:\STRAWBERRY\st388\SP7731CEB_ws607_6.0_WS607_TS_AL888_STRAWBERRY_V0.8_20170524_ST388\
Done!

Flash & Firmware Strawberry ST9119 ~ SPD SC7731C

Brand           : strawberry
Phone Model     : ST9119
Android Ver     : 6.0
CPU/Processor   : SP7731C_V1.0.0
SPD Project ver : sp7731c_fs285_32v4_project-user 6.0 MRA58K eng.xdbf10.20170909.110020 SW Version      : STRAWBERRY_ST9119_V05_20170909_1059

Bahan :

  1.  Download Firmware PAC Strawberry ST9119 V05 atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Firmware Strawberry ST9119 versi lain :

Note :
1. Boot volume +/-

 Cara Flash Strawberry ST9119 via Research Download

Log Read Firmware Strawberry ST9119
Action : Read PAC
 Boot : SC7731C-EMMC
 Tips:
 1.Remove Battery, Insert usb cable, Insert battery
 2.power off Phone, Remove & Reinsert Battery , insert USB Cable
 (In Case Some Phone Required to hold bootkey)
 Waiting for Phone Usb….
 Phone found : SPRD U2S Diag (COM7)
 Connecting…
 Bootstrap: SPRD3
 Connected done.
 sending 1st boot…
 waiting for ack…
 1st boot done.
 Sending 2nd boot…
 2nd boot done.
 Checking H/W report info…
 Read info is done.

 Reading Project Property …

 Brand           : strawberry
 Phone Model     : ST9119
 Android Ver     : 6.0
 CPU/Processor   : SP7731C_V1.0.0
 SPD Project ver : sp7731c_fs285_32v4_project-user 6.0 MRA58K eng.xdbf10.20170909.110020 release-keys
 SW Version      : STRAWBERRY_ST9119_V05_20170909_1059
 Making dir: E:\andro 1\strawberry\st9119\spd_7731C_EMMC_strawberry_ST9119_Android6.0_STRAWBERRY_ST9119_V05
_20170909_1059_20180628_201506\…[ok]…[ok]…[ok]

 Dumping Flash Image Now…
 Reading splloader…ok
 Reading uboot…ok
 Reading recovery…ok
 Reading system…ok
 Reading userdata…ok
 Reading cache…ok
 Reading misc…ok
 Reading boot…ok
 Reading wmodem…ok
 Reading wdsp…ok
 Reading wfixnv1…ok
 Reading wcnfixnv1…ok
 Reading wcnmodem…ok
 Reading prodnv…ok
 Reading sysinfo…ok
 Reading sysinfo…ok
 Reading logo…ok
 Reading fbootlogo…ok
 Packing …
 Copying file: splloader…ok
 Copying file: uboot…ok
 Copying file: recovery…ok
 Copying file: system…ok
 Copying file: userdata…ok
 Copying file: cache…ok
 Copying file: boot…ok
 Copying file: wmodem…ok
 Copying file: wdsp…ok
 Copying file: wfixnv1…ok
 Copying file: wcnfixnv1…ok
 Copying file: wcnmodem…ok
 Copying file: prodnv…ok
 Copying file: sysinfo…ok
 Copying file: sysinfo…ok
 Copying file: logo…ok
 Copying file: fbootlogo…ok
 Creating XML Settings …ok
 Rebuilding Packet Header …ok
 Deleting TmpDir…ok
 BinPacket saved to: E:\andro 1\strawberry\st9119\CSTool_spd_7731C_EMMC_strawberry_ST9119_Android6.0
_STRAWBERRY_ST9119_V05_20170909_1059_20180628_201506.pac
 All done

 Action completed
 Time taken : 00:16:36

Flash Strawberry S8 SP7731

Strawberry S8
Model Name  : H100
Model Brand : S8
Model Device: H100
AndrVersion : 5.0.1
BaseBand CPU: H100
Project Ver : H100 14B_test-keys
Model Ext   : S8

Bahan:
1. Download Firmware PAC Strawberry S8 atau Download disini

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash  Strawberry S8 via Research Download

Log Read Firmware  Strawberry S8
Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : H100
Model Brand : S8
Model Device: H100
AndrVersion : 5.0.1
BaseBand CPU: H100
Project Ver : H100 14B_test-keys
Model Ext   : S8
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 772 MiB
Saved to : E:\andro 1\strawberry\s8\H100_H100_5.0.1_H100_14B_test-keys_S8\
Done!