Firmware Flash HOTWAV SYMBOL MAX Scatter File

 Patch Level    : O11019
Display ID     : D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 1543481090
Product Model  : Symbol Max
Product Brand  : HOTWAV
Product Name   : Symbol_Max
Product Device : Symbol_Max
Product Manfct : HOTWAV
Product Info   : d3966_2g
Product Board  : d3966_2g
Board Platform : mt6739

Bahan :
1. Download Firmware HOTWAV SYMBOL MAX Scatter File

2. Tested Via CM2, SP-Flash-Tool blm test Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 NOTE :

TESTED CM2 V2.10 BASE _V1952

 Log Read Firmware HOTWAV SYMBOL MAX Scatter File

Operation : Read Firmware [ v2.10 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM4)
MODE : PRELOADER PORT
PORT : 4
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1952 | Manual : Disabled
BROM : SOCID : 18D614CB6DB62B6D0D30F509A26C7E198711BAA1404205F5DC2033E1700E8A03
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 90014A484147326550704D754056347
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HAG2e
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB800000 [ 14.68 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 9CCD730DF34B552ED6502BBE4086BABC

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 1543481090
Product Model  : Symbol Max
Product Brand  : HOTWAV
Product Name   : Symbol_Max
Product Device : Symbol_Max
Product Manfct : HOTWAV
Product Info   : d3966_2g
Product Board  : d3966_2g
Board Platform : mt6739

MT6739__HOTWAV__Symbol_Max__8.1.0__D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05__O11019__d3966_2g

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 45%
Read : system.img
ExtSparse : Compression ratio : 14%
Read : cache.img
Read : userdata.img
Read : sdrpmb.img

FW Size  : 2.58 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\ANDROID LAIN2\hot wave\symbol max\MT6739__HOTWAV__Symbol_Max__8.1.0__D3966D3_HOTWAV_T17_Symbol_Max_HD_162_WB158LB135782040_V01.01B05__O11019__d3966_2g\

Done!
Elapsed: 00:05:19

Cara Flash AXIOO AX7 S5T via Research Download

Model Name  : Axioo_AX7

Model Brand : Axioo

Model Device: Axioo_AX7

AndrVersion : 6.0

BaseBand CPU: SP9832A_2H11_VOLTE

Project Ver : Axioo_S5T_GSC0_SW20171108

Model Ext   : Axioo_AX7

Tool & Bahan :

  1. Download Firmware PAC Axioo AX7 S5T Tablet atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (+-)

Cara Flash AXIOO AX7 S5T via Research Download

Log Read Firmware Axioo S5T

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX7
Model Brand : Axioo
Model Device: Axioo_AX7
AndrVersion : 6.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_S5T_GSC0_SW20171108
Model Ext   : Axioo_AX7

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_600x1024.bin
[Read Ok] : fblogo_600x1024.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2102 MiB
Saved to : D:\axioo\axioo s5t\stock rom axioo s5t\SP9832A_2H11_VOLTE_Axioo_AX7_6.0_Axioo_S5T_GSC0_SW20171108_Axioo_AX7\
Done!

912ac-syarat2bdan2bketentuan

 

Firmware & Flash Axioo PICOpad 7H2 / PICOpad_S2L

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

Tool & Bahan :

  1. Download Firmware PAC AXIOO PICOPAD 7H2 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash AXIOO PICOPAD 7H2 via Research Download

Log Read Info AXIOO PICOPAD 7H2
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 5 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:12 

Flash & Firmware Maxtron V15 SPD

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash Maxtron V15 via Research Download

Log Read Firmware Maxtron V15 
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

Flash & Firmware Strawberry ST7701 SPD

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

Tool & Bahan :

  1. Download Firmware PAC Strawberry ST 7701 FS066_CF8_LS019_ST7701_L12819_16B  atau Download Disini
  2. Download Firmware PAC Strawberry ST 7701  SP7731GEA_HDR_ST7701_6.0_LS019_INDB_V02 atau Download Disini
  3. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4. Tutorial Flash via research here
  5. Driver SPD by InfinityBox
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume +-

Cara Flash Strawberry ST7701 via Research Download

Log Read Firmware Strawberry ST7701
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1555 MiB
Saved to : E:\STRAWBERRY\New folder\SP7731GEA_HDR_ST7701_6.0_FS066_CF8_LS019_ST7701_L12819_16B_ST7701\
Done!

Flash Asus Z010D ZC550KL via Fastboot 1 Klik

Bahan :

1. Download Firmware ASUS Z010D / ZC550KL 1KLIK Fastboot Mode atau Download Disini
2. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara kerja :
1.  Matikan Asus Z010D
2. Tekan volum up + on sampe muncul fastboot mode
3. Colokan Asus Z010d ke PC
4. Install driver Download Disini
5. Klik flashall.bat, selanjutnya lihat video
6. Flash done, auto restart, tunggu loading, biasanya lama habis flash
7. Bila tetep stuck, masuk recovery volume down + on, reset factory
8. Done

Video Cara Flash Asus Z010D 1klik fastboot mode

Flash Polytron R2502 White & Red

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

Bahan :
1. Download Firmware PAC Polytron R2502

 

 

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash Polytron R2502 via Research Download

Log Read Firmware Polytron R2502
Start  at : [3/23/2017 / 8:57:54 PM]
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1071 MiB
Saved to : E:\InfinityBox\CM2SPD\Flash\SP7731GEA_scx35_sp7731gea_4.4.2_Polytron.B1B8.007.20151102_Polytron_R2502\
Done!

Flash Huawei CUN-L22 BI / Bahasa Indonesia

platform: MT6735, cpu abi: armeabi-v7a
manufacturer: HUAWEI
board: CUN-L22, name: CUN-L22
brand: HUAWEI, model: HUAWEI CUN-L22
build id: HUAWEICUN-L22, version: 5.1 Lollipop (CUN-L22C567B130)
build description: full_hq6735_35u_b1n_l1-user 5.1 HUAWEI 1491876625 test-keys
build version: ALPS.L1.MP3.HQ6753.65C.B1N.L1.V1_HQ6735.35U.B1N.L1_P16

Bahan :
1. Download Firmware Huawei CUN-L22  & Tool C567B130 atau Download Disini
2. Download Firmware Huawei CUN-L22 versi lain dibawah
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Rom Huawei CUN-L22 versi lain :

Langkah kerja :
1. Download dan extrax, nama folder pendek saja, jangan pake sub folder kebanyakan
2. Buka Flash tool
3. Klik download Agent arahkan ke ROM CUN-L22 + Tool\SP_Flash_Tool_exe_Windows_v5.1548.00.000-secure\808_sec_da\ => pilih DA_SWSEC.bin
4. Pilih scatter , uncheck preloader
5. Flash
Untuk lengkapnya silahkan lihat video di bawah

Note:
untuk FRP CUN-L22 :
1. Pake UFI => Ganti DA dgn 808_sec_da\DA_SWSEC.bin yg ada difolder flashtool, isikan scatter, identify, baru reset frp

2. atau search digoogle

Cara Flash Huawei CUN-L22 via Flash Tool

Log Read Firmware Huawei Cun L22
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G1e (0x483847316505), rev: 0x07, serial number: 0x54A8A01A
Manufacturing date: Sep 2016
CID: 90014A48 38473165 050754A8 A01A93C3
Capacity: 7.29 GiB(7,830,765,568 bytes)
 Boot1: 4096 KiB
 Boot2: 4096 KiB
 RPMB: 4096 KiB
 User area: 7.28 GiB(7,818,182,656 bytes)
platform: MT6735, cpu abi: armeabi-v7a
manufacturer: HUAWEI
board: CUN-L22, name: CUN-L22
brand: HUAWEI, model: HUAWEI CUN-L22
build id: HUAWEICUN-L22, version: 5.1 Lollipop (CUN-L22C567B130)
build description: full_hq6735_35u_b1n_l1-user 5.1 HUAWEI 1491876625 test-keys
build version: ALPS.L1.MP3.HQ6753.65C.B1N.L1.V1_HQ6735.35U.B1N.L1_P16
screen resolution: 1280 x 720
main camera: ov13850_mipi_raw ov13850qt_mipi_raw ov8855_mipi_raw s5k4h8_mipi_raw imx219_mipi_raw hi843b_808_mipi_raw
 lens: dw9714ov13850af bu6424af dw9714af dw9714qtaf dw9714imx219af dw9714hi843b808af
front camera: ov5670_mipi_raw hi551_mipi_raw gc2355_mipi_raw sp2508_mipi_raw sp2509_mipi_raw
audio: amp_6323pmic_spk
touch: GT9157
Reading preloader_hq6735_35u_b1n_l1.bin… Done.
Reading pgpt… Done.
Reading proinfo.bin… Done.
Reading nvram… Done.
Reading protect1… Done.
Reading protect2… Done.
Reading lk.bin… Done.
Reading para… Done.
Reading boot.img… Done.
Reading recovery.img… Done.
Reading logo.bin… Done.
Reading expdb… Done.
Reading rootm… Done.
Reading seccfg… Done.
Reading oemkeystore… Done.
Reading secro.img… Done.
Reading keystore… Done.
Reading trustzone.bin… Done.
Reading trustzone.bin… Done.
Reading oeminfo… Done.
Reading frp… Done.
Reading nvdata… Done.
Reading metadata… Done.
Reading flashinfo… Done.
Files saved to \\E:\huawei\huawei%20cun%20l22\New%20folder\

Flash Mito A91 SP7731CEA T08

Model Name  : A91
Model Brand : MITO
Model Device: A91
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MITO_A91_20161223_648_B1T08
Model Ext   : MITO A91

Bahan :

  1.  Download Firmware PAC MITO A91 T08 atau Download Disini
  2.  Download Firmware PAC MITO_A91_T12 atau Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume +/-
2. Tested buat versi T08

Cara Flash Mito A91 via SPD UPGRADE TOOL

 Log Read Firmware Mito A91
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : A91
Model Brand : MITO
Model Device: A91
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MITO_A91_20161223_648_B1T08
Model Ext   : MITO A91
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1939 MiB
Saved to : E:\andro 1\mito\a91\t08\SP7731CEA_A91_6.0_MITO_A91_20161223_648_B1T08_MITO_A91\
Done!