Flash ADVAN S45D Build : A45S/C20_V1.0/KitKat4.4

Model Name  : revo_3204
Model Brand : ADVAN
Model Device: Vandroid
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : A45S_S45D_V1_150318
Model Ext   : S45D

Bahan :
1. Download Firmware PAC

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Advan S45D via Research Download

Log Read Firmware Advan S45D

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : revo_3204
Model Brand : ADVAN
Model Device: Vandroid
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : A45S_S45D_V1_150318
Model Ext   : S45D
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.47_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 865 MiB
Saved to : E:\andro 1\advan\S45D BUILD A45S C20 V1.0 Kitkat4.4\SP7731GEA_Vandroid_4.4.2_A45S_S45D_V1_150318_S45D\
Done!

Cara Flash Cyrus Glory G1000

Model Name  : skytek_wg4030s
Model Brand : CYRUS
Model Device: skytek_wg4030s
AndrVersion : 4.4.2
BaseBand CPU: SKYTEK_WG4030S
Project Ver : Glory-G1000-2015.07.01
Model Ext   : Glory G1000

Bahan :
1. Download Firmware PAC

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash  Cyrus Glory G1000 via Research Download

Log Read Firmware Cyrus Glory G1000
 Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : skytek_wg4030s
Model Brand : CYRUS
Model Device: skytek_wg4030s
AndrVersion : 4.4.2
BaseBand CPU: SKYTEK_WG4030S
Project Ver : Glory-G1000-2015.07.01
Model Ext   : Glory G1000
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1080 MiB
Saved to : E:\andro 1\CYRUS\G1000\SKYTEK_WG4030S_skytek_wg4030s_4.4.2_Glory-G1000-2015.07.01_Glory_G1000\
Done!

Flash Iphone 6S Plus SUPER COPY MT6572

Brand     : iPhone
ProdName  : e165_jb3
ProdModel : 6s Plus
Device    : e165_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Mohon Diperhatikan :
1. Cek secara Fisik tombol volume, sensor, letak kamera dan yang lain harus sama dengan SS diatas
2. Preloader_e165_jb3.bin, Android 4.2.2, FLASH_INF : [TOSHIBA] , 09G40
3. Tested juga buat  [eMMC] : FLASH_INF : [KINGSTON] , G40CM
4. Kalau pake box silahkan info terlebih dahulu, LCD CAMERA, TS, DKK sama atau tidak
EXTRA :
LCD [0] : ili9807_qhd_dsi_vdo_cpt
LCD [1] : nt35517_qhd_dsi_vdo_boe
LCD [2] :  jd9261_qhd_dsi_vdo_auo rm68191_qhd_dsi_vdo_tm
LCD Res : 960×540
TOUCH [0] : GT9XX
TOUCH [1] : ft6306_gs
CAM [0] : gc0328_yuv
CAM [1] : gc0308_yuv
CAM [2] : ov5645_mipi_yuv
CAM [3] : s5k4ecgx_mipi_yuv
CAM [4] : gc2155_mipi_yuv
CAM [5] : gc2145mipi_yuv

Bahan :

  1.  Download Firmware Iphone 6S Plus SUPER COPY atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Iphone 6S Plus SUPER COPY Flash Tool

Log Read Firmware Iphone 6S Plus SUPER COPY
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003030344739301091DC4DCBCF09
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 1101003030344739301091DC4DCBCF09
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : D8D46EB1F265F82E3F3BC6336009B5AD
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : iPhone
ProdName  : e165_jb3
ProdModel : 6s Plus
Device    : e165_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_e165_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / e165_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 681 MiB
Scatter saved to : E:\andro 1\iphone kopyor\i6s plus\MT6572__iPhone__6s_Plus__e165_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!

Flash Venera 611

Brand     : Venera
ProdName  : Z35CL
ProdModel : Venera 611
Device    : Z35CL
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

  1.  Download Firmware Venera 611 Full Scatter atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Venera 611 Flash Tool

Log Read Firmware Venera 611
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8C00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005600AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory …
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x00A3 , [Hynix] H9TA4GH2GDMCPR
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0056 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : E0B033D5E1BC0D85317222940454D195
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

[Read Ok] : preloader_vanzo72_wet_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / vanzo72_wet_lca / NAND
FW Size : 267 MiB

Brand     : Venera
ProdName  : Z35CL
ProdModel : Venera 611
Device    : Z35CL
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Android Info saved

Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6572_NAND_Venera__Venera 611__Z35CL__4.2.2__ALPS.JB3.MP.V1

Done!

Flash Evercoss A28T Nand

EVERCOSS A28T V008 20140108

Brand     : A28T
ProdName  : A28T
ProdModel : A28T
Device    : wt97055
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

  1.  Download Firmware Evercoss A28T atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Evercoss A28T

Log Read Firmware Evercoss A28T
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 002C00BC009000660054000000000000
eMMC Flash : NOT INSTALLED
Initialize Memory …
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0091 , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID    : F40D05AAC73EB76B6F7587367B626C81
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

[Read Ok] : preloader_wt97055.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt97055 / NAND
FW Size : 307 MiB

Brand     : A28T
ProdName  : A28T
ProdModel : A28T
Device    : wt97055
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Android Info saved

Scatter saved to : E:\andro 1\evercoss\a28t nand\MT6572_NAND_A28T__A28T__wt97055__4.2.2__ALPS.JB3.MP.V1

Done!

Repair Advan T1R Touch Screen Hank After Flash Build No : P7021/V2.0/KK4.4.2

 ADVAN T1R BUILD NO: P7021/V2.0/KK4.4.2

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1R
Device    : advan89_6833
AndroidVer: 4.4.2
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.KK1.MP5.V1.25

Bahan :

  1.  Download Firmware Fix TS ADVAN T1R Build No : P7021/V2.0/KK4.4.2 V09 atau Download Disini
  2.  Download Firmware Advan T1R versi V06 atau Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

NOTE :
Bila setelah flash muncul encrypted, tinggal reset aja.

Flash Advan T1R via Flash Tool

Log read Firmware Advan T1R

Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6583
BB_CPU_NME : [MediaTek] MT6583|6589_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.3.2 on BBID : 0x86
NAND Flash : NOT INSTALLED
eMMC Flash : 4E0301886472614354B7422065925639
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642042B75439569265
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 481AB4A4D15C04A3BCAA33C875D37B3D
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1R
Device    : advan89_6833
AndroidVer: 4.4.2
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.KK1.MP5.V1.25

[Read Ok] : preloader_advan89_6833.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / advan89_6833 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1092 MiB
Scatter saved to : F:\andro3\ADVAN\advan t1r p7021 v2.0 kk4.4.2\fix ts\MT6589__ADVAN__T1R__advan89_6833__4.4.2__ALPS.KK1.MP5.V1.25\

All done!