BYPASS FRP & FLASH HM M3

FRP HM M3 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya, thx

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3

 Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

Bahan :

A. BYPASS FRP ONLY ukuran PAC 1 MB

B. ROM PAC FULL HM M3

     TOOL :

    1.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    2.  Driver SPD by InfinityBox
    3.  Tutorial Flash via research here
    4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Kerja :

    • Untuk FRP HM M3 tinggal pake PAC BYPASS FRP ONLY
    • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
    • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
    • Boot volume (+)

    Cara Bypass FRP HM M3 via Research Download

    Cara Flash HM M3 via Research Download

    Log Read Firmware HM M3
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731c_1h10_oversea
    Model Brand : HM
    Model Device: sp7731c_1h10
    AndrVersion : 6.0
    BaseBand CPU: SP7731CEA
    Project Ver : MRA58K release-keys
    Model Ext   : M3
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731C_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_720x1280.bin
    [Read Ok] : logo2.bin
    [Read Ok] : logo3.bin
    [Read Ok] : logo4.bin
    [Read Ok] : logo5.bin
    [Read Ok] : logo6.bin
    [Read Ok] : logo7.bin
    [Read Ok] : logo8.bin
    [Read Ok] : logo9.bin
    [Read Ok] : logo10.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : sysinfo.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1707 MiB
    Saved to : E:\hm\m3\New folder\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M3\
    Done!

    Flash – Repair Aldo AS 9 Blank After Flash

    Aldo AS9
    Model Name  : sp7731cea_t13_bp236_64_8_dt
    Model Brand : SPRD
    Model Device: t13_bp236_64_8
    AndrVersion : 5.1
    BaseBand CPU: SP7731CEA_T13_ZX_64_8
    Project Ver : BP236_ALDO_V2.1_20161011
    Model Ext   : ALDO

    Kasus awal bootloop, di flash pake pac aldo as9 v1.2 malah jadi blank biru tapi muncul suara, seperti ss dibawah :

    NOTE : SILAHKAN CEK FISIK ALDO AS9 DENGAN SS DIBAWAH
    Bahan :

    1. Download Firmware PAC Aldo AS9 V2.1 Lolipop 5.1 atau Download Disini
     
                         Aldo AS9 V2.1
    2. Download Rom Repair Aldo AS 9 V2.1 BLANK Lolypop atau Download Disini
    ASLINYA Project Ver : BP236_ALDO_V2.1_20161203
    Fisik As 9 atas ma bawah man beda di stricker QC, merah ma biru, tapi apa man itu yg membedakan???
    Rom sama dg v2.1 diatas (NO.1) tapi beda UBOOT, BOOT, dan SPL_LOADER

    3. Download Firmware PAC Aldo AS9 V1.2 Marshmellow atau Download Disini

                   ALDO AS9 V1.2

    4. Download Firmware PAC Aldo AS9 V1.0 Marshmallow 6.0 atau Download Disini

                       Aldo AS9 V1.0

    4. Download SPD_Upgrade_Tool_R4.0.0001  Download Disini
    5. Driver SPD by InfinityBox
    6. Tutorial Flash via research here
    7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Error pada research download baca disini

    Note :
    1. Flash pake SPD_Upgrade_Tool_R4.0.0001
    2. Bila tetap blank silahkan buka setting pada tool upgrade tool, pilih pada tab FLASH OPERATIONS, centang Erase All Flash, flash seperti biasa, done
    3. Yang gak tahu versi flash system, user data, ma cache aja, coba satu per satu
    4. Untuk V2.1 lolypop yg habis flash dengan v2.1 jadi blank / lcd garis-garis muncul suara, silahkan flash dengan Firmware aldo as9 v2.1 yang ke dua, repair blank, coba dulu pake versi lain, bru pake yg repair

    Cara Flash Aldo AS 9 via Research Download

    Log Read Firmware Aldo AS 9
    Operation : Read FullFlash [ v1.24 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    Model Name  : sp7731cea_t13_bp236_64_8_dt
    Model Brand : SPRD
    Model Device: t13_bp236_64_8
    AndrVersion : 5.1
    BaseBand CPU: SP7731CEA_T13_ZX_64_8
    Project Ver : BP236_ALDO_V2.1_20161011
    Model Ext   : ALDO
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731C_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Read Ok] : oem.img
    [Read Ok] : sysinfo.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img
    AndroidInfo created
    Firmware Size : 3209 MiB
    Saved to : E:\andro 1\aldo\as9\v2.1\SP7731CEA_T13_ZX_64_8_t13_bp236_64_8_5.1_BP236_ALDO_V2.1_20161011_ALDO\
    Done!

    Firmware Advan S4G W1 V2.1 OS4.4

    Gak buat ss simpanan lama, firmware work and tested.

    Brand     : ADVAN
    ProdName  : S4G
    ProdModel : S4G
    Device    : x902
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP7.V1.22

    Firmware ini hanya buat ADVAN S4G W1 V2.1 OS4.4 cek di back sticker.

    Bahan :

    1.  Download firmware stock rom ADVAN S4G  DOWNLOAD DISINI
    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

     Flash ADVAN S4G W1 V2.1 OS4.4 via Flash Tool

     Log read Firmware Advan S4G
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 150100534A5330304D00ABE01E499FB3
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
    [eMMC] : FLASH_CID : 150100534A5330304D00ABE01E499FB3
    [eMMC] : FLASH_EXT : 0x00100000 , 0x00100000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand     : ADVAN
    ProdName  : S4G
    ProdModel : S4G
    Device    : x902
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP7.V1.22

    EXTRA :
    LCD [0] : otm8018b_dsi_vdo
    LCD [1] : rm68171_wvga_dsi_vdo
    LCD [2] : ili9806e_dsi_vdo
    LCD [3] : otm8019a_dsi_vdo
    LCD Res : 800×480
    TOUCH [0] : ft5316
    TOUCH [1] : gslx68x
    CAM [0] : gc0329_yuv
    CAM [1] : gc0328_yuv
    CAM [2] : sp0a19_yuv
    CAM [3] : sp0a19_sub_yuv
    CAM [4] : sp0a19_sub_yuv
    CAM [5] : sp0718_yuv
    CAM [6] : bf3703_yuv
    CAM [7] : bf3920_yuv
    CAM [8] :  bf3903_yuv
    CAM [9] : sp2519_yuv
    MODEM : sudy72_cwet_kk_hspa
    LOCALE : in_ID en_US zh_CN

    Done!
    Elapsed: 00:00:22
    Reconnect Power/Cable!

    Finish at : [12/30/2015 / 8:02:57 PM]

    Operation : Read Flash [ v1.40 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 150100534A5330304D00ABE01E499FB3
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
    [eMMC] : FLASH_CID : 150100534A5330304D00ABE01E499FB3
    [eMMC] : FLASH_EXT : 0x00100000 , 0x00100000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Conent now …

    Brand     : ADVAN
    ProdName  : S4G
    ProdModel : S4G
    Device    : x902
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP7.V1.22

    [Read Ok] : preloader_x902.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    [Read Ok] : fat.img

    [ScatCFG] : MT6572 / V1.1.1 / x902 / EMMC
    FW Size : 677 MiB
    Scatter saved to : G:\andro3\ADVAN\advan s4g w1 X902 V2.1 OS4.4\MT6572__ADVAN__S4G__x902__4.4.2__ALPS.KK1.MP7.V1.22\

    All done!