Flash Polytron R2502 White & Red

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

Bahan :
1. Download Firmware PAC Polytron R2502

 

 

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash Polytron R2502 via Research Download

Log Read Firmware Polytron R2502
Start  at : [3/23/2017 / 8:57:54 PM]
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1071 MiB
Saved to : E:\InfinityBox\CM2SPD\Flash\SP7731GEA_scx35_sp7731gea_4.4.2_Polytron.B1B8.007.20151102_Polytron_R2502\
Done!

Flash Polytron R2507 White / Dark Gold ZT

 POLYTRON R2507 V5.2.6 20161217

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2507_V5.2.6_20161217
Model Ext   : POLYTRON R2507

Bahan :

    1. Download Firmware PAC Polytron R2507 White Gold ZT V5.2.6 20161217 atau Download Disini
     
    2. Download Firmware PAC Polytron R2507 Dark Gold ZT V5.2.7 20161223 atau Download Disini

    3. Download WAJIP PAKE SPD_Upgrade_Tool_R4.0.0001  Download Disini
    4.  Driver SPD by InfinityBox
    5. Tutorial Flash via research here
    6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Firmware Pac Polytron R2507 versi lain :

    Error pada research download baca disini

    Cara Flash R2507 via SPD UPGRADE TOOL

    Log read Firmware Polytron R2507 White Gold ZT
    Operation : Read FullFlash [ v1.25 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2507_V5.2.6_20161217
    Model Ext   : POLYTRON R2507
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : fbootlogo3.bin
    [Read Ok] : fbootlogo4.bin
    [Read Ok] : fbootlogo5.bin
    [Build Ok] : userdata.img
    AndroidInfo created
    Firmware Size : 2229 MiB
    Saved to : E:\polytron\New folder\SP7731GEA_HDR_device_5.1_POLYTRON_R2507_V5.2.6_20161217_POLYTRON_R2507\
    Done!

    Elapsed: 00:14:57

    Repair Oppo R829 Blank After Flash

    Brand     : OPPO
    ProdName  : OPPO82_13075
    ProdModel : R829
    Device    : R829
    AndroidVer: 4.2.2
    MTKxCPU   : MT6582
    MTKxPRJ   : R829_11_A.09_140430

    Setelah flash Oppo R829 malah menjadi Blank putih atau white screen bergaris-garis, ini karena Oppo R829 kita flash salah firmware atau LK / UBOOT, tested buat Oppo R829 seperti ss diatas. Tampilan Blank putih habis diflash seperti dibawah :

    Bahan :

    1.  Download File LK / Uboot saja atau disini
    2.  Full Rom OPPO R829 Download Disni
    3.  Download Flash Tool DOWNLOAD DISINI
    4.  Driver bila belum punya instal dulu driver mtknya
    5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara :
    – Tinggal flash LK / UBOOT seperti video dibawah

     Flash Oppo R829 via Flash Tool

    Log Read info Oppo R829
    Operation : Check / Read Info [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 4 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x0005
    BLVersion : 0x00FE
    PreLoader : NOT Active [ Erased ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A4841473464040502A1DB3A41ED
    Initialize Memory …
    DRAM configured from IDB!
    DRAM initialize passed!
    DRAM size : 0x40000000
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , d4GA
    [eMMC] : FLASH_CID : 90014A4841473464040502A1DB3A41ED
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB800000
    [eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
    DEV RID    : 0xA931556724B2DED71A063B15A156F301
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000 [1 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand     : OPPO
    ProdName  : OPPO82_13075
    ProdModel : R829
    Device    : R829
    AndroidVer: 4.2.2
    MTKxCPU   : MT6582
    MTKxPRJ   : R829_11_A.09_140430

    Done!