Firmware Wiko TOMMY 3 Android 7 & 8

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1539253798
Product Brand  : TINNO
Product Device : W_K600
Product Info   : k600_go
Product Model  : K600AG
Product Brand  : TINNO
Product Name   : K600
Product Device : W_K600
Product Manfct : TINNO
Product Board  : k600_go
Board Platform : mt6739

Bahan :
1. Download Firmware Wiko TOMMY 3   Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Operation : Read Firmware Wiko TOMMY 3
ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : Wiko : SEC_6739 | Manual : Disabled
BROM : SOCID : C3938EA812AC5827BB680B6D94C6BEA4738886B3148C5C69E46DEA5371E1FF73
AGENT : Look for suitable BootChain in DA …
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        EMMC: 150100464536324D420365ADF2EB8521
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : A89DCC1BDB59F641EDD63BCB719C87E3

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1539253798
Product Brand  : TINNO
Product Device : W_K600
Product Info   : k600_go
Product Model  : K600AG
Product Brand  : TINNO
Product Name   : K600
Product Device : W_K600
Product Manfct : TINNO
Product Board  : k600_go
Board Platform : mt6739

MT6739__TINNO__K600AG__8.1.0__O11019__k600_go

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : misc.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 21%
Read : system.img
ExtSparse : Compression ratio : 7%
Read : cache.img
Read : userdata.img

FW Size  : 1.41 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\wiko\tommy 3\MT6739__TINNO__K600AG__8.1.0__O11019__k600_go\

Cara Bypass FRP & Flash Wiko Jerry

FRP Wiko Jerry  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Brand     : WIKO

ProdName  : V2802AN

ProdModel : JERRY

Device    : V2802AN

AndroidVer: 6.0

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.W10.24.p0

Bahan :

1. Download Bypass FRP Only

2. Download Firmware Full

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini

4. Driver bila belum punya instal dulu driver mtknya

5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Bypass Frp Wiko Jerry via Flash Tool

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 21 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473165050728F192486379
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A4838473165050728F192486379
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD986688463A1F82699ED77051
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : WIKO
ProdName  : V2802AN
ProdModel : JERRY
Device    : V2802AN
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.W10.24.p0

[Read Ok] : preloader_v2802.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : ewdata.img
[Read Ok] : apedata.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v2802 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2276 MiB
Scatter saved to : D:\wiko\jerry\New folder\MT6580__WIKO__JERRY__V2802AN__6.0__ALPS.W10.24.p0\

All done!

Flash Wiko Bloom 2

Sorry lupa bikin ss

Brand     : WIKO
ProdName  : wiko
ProdModel : BLOOM2
Device    : wiko
AndroidVer: 5.0
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_TINNO6582.WT.L_P7

Bahan :

  1.  Download Firmware Wiko Bloom 2 atau Download Disni
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Flash Wiko Bloom 2 via Flash Tool

Log Read Firmware Wiko Bloom 2
 Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040507A25DB632F3
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040507A25DB632F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 96875DEA6F52DAAED88733A13B3AE6E3
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : WIKO
ProdName  : wiko
ProdModel : BLOOM2
Device    : wiko
AndroidVer: 5.0
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_TINNO6582.WT.L_P7

[Read Ok] : preloader_s4710.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / s4710 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2101 MiB
Scatter saved to : F:\andro3\wiko\wiko bloom2\MT6582__WIKO__BLOOM2__wiko__5.0__ALPS.L0.MP2.V1_TINNO6582.WT.L_P7\

All done!

Flash Wiko Fizz Flash Tool

Brand     : WIKO
ProdName  : wiko
ProdModel : FIZZ
Device    : wiko
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Firmware Wiko Fizz Version 8
Firmware Wiko Fizz BI Bahasa Indonesia
Firmware Wiko Fizz BI Bahasa Indonesia Tested work ok
Bahan :

  1.  Download firmware stock rom Wiko Fizz JB 4.2.2
  2.  Link langsung mediafire disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Wiko Fizz via Flash Tool

About Wiko Fizz

Log Read Firmware Wiko Fizz

Start  at : [3/21/2016 / 10:05:12 PM]
Operation : Read Flash [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048601A34221411D
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A34221411D
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 531DE82E3D9433E785D1C6AAFF8F7C26
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : WIKO
ProdName  : wiko
ProdModel : FIZZ
Device    : wiko
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_wiko.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wiko / EMMC
Android Info saved
HWConfig Info saved
FW Size : 664 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__WIKO__FIZZ__wiko__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:04:06